how much is a lip flip near me

17 FUN OUTDOOR WATER GAMES FOR KIDS AND ADULTS

Whether you’re planning water games for kids, adults, or the whole family, this list has plenty of ways to beat the heat! From water balloon games to sprinkler challenges, and even a water bottle flip game with a splashy twist, these ideas are perfect for a hot summer day. Try one or try them all for hours of cooling, refreshing fun!

Water Wars

Game: Water Fight Frenzy

Setup:

  1. Gather all the water weapons you can find—hoses, water guns, water balloons, cups, buckets, and anything else you can use to hold and throw water.
  2. Split the group into two teams.

How to Play:

  1. Once the teams are ready, start the water fight! Use everything at your disposal to soak the other team—whether it’s by spraying with water guns, throwing water balloons, or dousing each other with buckets or cups of water.
  2. There are no winners or points in this game. The goal is simple: get as wet as possible!

Winning:

There are no winners—everyone just gets drenched and has fun! It’s all about the splashy chaos and cooling off on a hot day.

This is the ultimate no-rules water battle that’s perfect for letting loose and enjoying a good time with friends!

Cup To Cup

ndfold everyone in the line! This makes it trickier and funnier as players fumble to pass and pour the water.

Supplies: Two buckets, plastic cups

Setup:

  1. Place a full bucket of water at the start of the line in the grass, with the first player sitting just behind it.
  2. Have the rest of the team sit in a straight line behind the first player.
  3. The last player in the line should face the opposite direction, so they’re back-to-back with the player in front of them.
  4. Place an empty bucket (either smaller or with a halfway mark) in front of the last player.

How to Play:

  1. Give the first player an empty plastic cup. They must dip the cup into the full bucket and pass it backward over their head to the next player.
  2. Each player then passes the cup over their head to the next person, continuing until it reaches the last player, who dumps the water into the empty bucket.
  3. Pass the now-empty cup back up to the first player to repeat the process.

Winning:

The first team to fill their bucket to the marked line wins!

Adult Twist:

For an added challenge, blindfold everyone in the line! This makes it trickier and funnier as players fumble to pass and pour the water.

Water Bottle Toss

Supplies: Kiddie pool (or hose), empty plastic bottles, empty plastic bucket

Setup:

  1. Fill a kiddie pool with water (or have a hose nearby).
  2. Place an empty bucket on the opposite side of the yard.
  3. Put one or several empty water bottles in the kiddie pool.

How to Play:

  1. A player fills a water bottle from the kiddie pool or hose.
  2. They then toss the filled bottle across a line of teammates, passing it down the line toward the empty bucket.
  3. Each team member should be spaced far enough apart that they have to toss the bottle with some force, causing it to spin and possibly splash water, making the game more fun and messy!
  4. The last player in line pours any remaining water from the bottle into the empty bucket and then sends the empty bottle back to the starting player to refill.

Winning:

The first team to fill their bucket to the marked line wins!

Adult Twist:

Use larger 2-liter soda bottles instead of regular water bottles, making it more challenging to throw and creating bigger splashes!

Bucket Toss

Supplies: Kiddie pool filled with water, a small bucket for each teammate, and one larger bucket for the end of each team’s line.

Setup:

  1. Have one player from each team stand in or beside the kiddie pool with a bucket.
  2. Line up the rest of their team in a straight line extending away from the kiddie pool, with each player holding a small bucket. Space them out so they need to toss water to the next person rather than simply pouring it.
  3. Place an empty large bucket at the end of each line behind the last player.

How to Play:

  1. The first player in the line scoops water from the kiddie pool using their bucket.
  2. They then toss the water to the next teammate, who catches as much as they can in their own bucket.
  3. This continues down the line until the last player pours whatever water they caught into the team’s large end bucket.
  4. The empty buckets are passed back to the starting player to refill, and the process repeats.

Winning:

The first team to fill their large bucket to the marked line wins!

Sponge Toss

Supplies: Two plastic buckets, large sponges

Setup:

  1. Place a bucket full of water on one side of the yard and an empty bucket on the opposite side.
  2. Have each team line up their players between the two buckets. Once everyone is lined up, they must stay in their assigned spot and cannot move from it.
  3. The first player on each team should be next to the full bucket, and the last player should be by the empty bucket.

How to Play:

  1. The first player dunks the sponge in the full bucket, soaking up as much water as possible.
  2. They then toss the sponge to the next player, who passes it along the line until it reaches the final player by the empty bucket.
  3. The last player wrings out the sponge into the empty bucket and passes the empty sponge back up the line to start again.

Winning:

The first team to fill their bucket to the marked line wins!

Adult Twist:

Place the buckets much further apart, requiring players to toss the sponge with more force, making it harder to keep the sponge from dropping or spilling water!

Cash Or Splash

Game: Water Cup Cash

Supplies: Dixie cups, a table, tape, Sharpie (or stickers), water

Setup:

  1. Line up a row of Dixie cups on a table.
  2. Place a sticker or piece of tape on a handful of cups (about 10 out of 100 cups). On the cups with a sticker, write a dollar amount ranging from $1 to $10.
  3. Fill all of the cups with water, making sure the cups with the stickers are mixed in so that players can’t see which cups have money under them.

How to Play:

  1. Players take turns choosing one cup at a time.
  2. After choosing a cup, the player looks at the bottom of the cup.
  • If there’s money on the bottom (from the sticker or tape), they win that amount and toss the water to the side.
  • If the bottom is empty, they pour the water on their head and return to the back of the line.
  1. Continue playing until all the money has been found.

Winning:

There’s no ultimate winner in this game. The goal is simply to earn the most money by finding the cups with money underneath them! Whoever manages to collect the most cash by the end is the “richest” player.

This game is a fun, suspenseful way to get soaked while also adding a bit of competition to the mix. It’s perfect for a water-filled afternoon!

Water Balloon Volleyball 

Supplies: Water balloons, outdoor volleyball net, beach towels

Setup:

  1. Set up the volleyball net in an open outdoor space.
  2. Split your group into two even teams, one on each side of the net.
  3. Give each pair of players a beach towel, ensuring each player is holding one side of the towel.

How to Play:

  1. The game begins with one team receiving a water balloon.
  2. The team must place the water balloon in their beach towel (held by two players), and then use their arms to catapult the towel and launch the balloon over the net to the opposing team.
  3. The other team attempts to catch the water balloon in their towel and return it over the net in the same way.
  4. Play continues as teams volley the water balloon back and forth, trying to prevent it from hitting the ground or popping.
  5. If a team fails to catch the balloon or the balloon breaks when hit the ground, the other team earns a point. If a team scores an ace (the opposing team drops or breaks the balloon on the serve), they get two points.

Winning:

The first team to reach 10 points wins the game!

Adult Version:

Instead of using water balloons, use full-size balloons to make the game more challenging and reduce the chance of the balloon breaking too easily.

Sponge Run

Supplies: Two plastic buckets, large sponges (or a kiddie pool)

Setup:

  1. Place a bucket full of water (or a kiddie pool) on one side of the yard and an empty bucket on the opposite side.
  2. Give each player a sponge and have them stand by the full bucket or pool.

How to Play:

  1. Players dunk their sponges in the water to soak up as much as possible.
  2. They then place the sponge on their head and must hold it there as they run to the empty bucket, trying to keep as much water in the sponge as they can.
  3. Once they reach the empty bucket, they wring out the sponge into it, then run back to the starting point to repeat the process.

Winning:

The first person to fill their bucket to the marked line wins!

Adult Twist:

Players must balance the sponge on their head without holding it. If the sponge falls off, they must return to the starting point and try again. This adds a challenging twist to keeping the sponge steady while walking!

Pool Defender

Game: Ball Transfer Challenge

Supplies: Kiddie pool, plastic balls (like those small play balls), large 5-gallon buckets, rope or something to mark a “line”

Setup:

  1. Fill a kiddie pool with water and place it at the center of a 10-foot circle perimeter (you can mark the circle with a rope or anything that marks the boundary).
  2. Set up two teams of four players, with each team having two players inside the kiddie pool and two players outside the circle.
  3. Each team outside the pool should have a large 5-gallon bucket filled with plastic balls, and each team inside the pool needs to be ready to transfer those balls into their bucket.

How to Play:

  1. The players inside the kiddie pool must scoop or toss the balls out of the pool and pass them to their teammates standing outside the circle.
  2. The outside teammates must catch the balls and try to toss them into their own large 5-gallon bucket without stepping inside the circle.
  3. Teams continue transferring balls back and forth until all the balls are out of the kiddie pool and into their bucket.
  4. You can add a twist by setting a time limit to see which team can get the most balls in their bucket before the timer runs out!

Winning:

The team with the most balls in their bucket at the end of the game (or when the timer runs out) wins!

Adult Version:

Make the challenge more difficult by increasing the distance between the pool and the bucket, or by requiring players to use only one hand to pass the balls!

This game combines teamwork, speed, and a lot of water splashing for a fun summer challenge!

Water Balloon Dodgeball

Supplies: Water balloons (auto-fill for faster filling), a large bucket, tape or plastic cones

Setup:

  1. Fill a bunch of water balloons and place them in a large bucket in the middle of the yard. Use slightly larger balloons that are likely to break on impact.
  2. Use tape or cones to divide the yard into two sides, with the bucket of balloons in the middle.
  3. Split players into two teams, each on one side of the line.

How to Play:

  1. On “Go,” players race to the bucket, grab water balloons, and retreat to their side of the yard.
  2. Players throw water balloons at each other across the line, aiming to get their opponents out. Rules:
  • A player is out if they’re hit by a water balloon that actually breaks on them (not if it just splashes on the ground).
  • If a water balloon bounces off a player without breaking, they can pick it up and continue playing, or, if you prefer, you can rule that any hit means they’re out.
  • If a player catches an unbroken water balloon, the thrower is out. The catcher may also “revive” a teammate who’s on the sideline.
  • If a player attempts to catch a balloon but it breaks on them, they’re out.

Winning:

The game continues until one team has the last player standing, making them the winning team.

Adult Twist:

To stay in the game, the water balloon must break upon impact with the player—no simply bouncing off! This makes dodging and aiming more strategic and challenging.

Water Balloon Hot Potato

Supplies: Water balloons, a way to play music

Setup:

  1. Fill up several water balloons.
  2. Have everyone sit in a circle on the grass or in an open area.
  3. Give one person in the circle a water balloon to start.

How to Play:

  1. Start playing music while the players pass the water balloon around the circle.
  2. At random intervals, stop the music (without looking at the circle to avoid knowing who has the balloon).
  3. The player holding the water balloon when the music stops must pop it above their head, and they are out of the game.
  4. If there’s confusion about who “has” the balloon when the music stops (e.g., two players are holding it, or one player threw it just after the music stopped), have those players play rock, paper, scissors to decide who is out.
  5. Continue the game until only one person remains in the circle.

Winning:

The last person left in the circle, who hasn’t been eliminated, wins!

Adult Version:

  1. Move the circle a few feet apart so that players have to toss the water balloon to the next person.
  2. If someone makes a terrible throw and the balloon doesn’t reach the next person, that person is out.
  3. If a player catches the balloon but drops it, the person who dropped the balloon is out.
  4. Keep playing until only one person remains!

Splish Splash

Game: Splash the Bucket

Supplies: Kiddie pool, small bucket, timer (or stopwatch)

Setup:

  1. Place a kiddie pool filled with water in one part of your yard.
  2. Position a small bucket about 3 feet away from the edge of the kiddie pool.
  3. Fill the small bucket halfway with water to give players a baseline to work with.

How to Play:

  1. Players stand in the kiddie pool filled with water and get ready to splash.
  2. When you say “Go,” the player must use only their hands to splash water from the pool into the small bucket.
  3. The goal is to fill the bucket as much as possible within one minute.
  4. Players can scoop or splash the water, but they cannot pick up the bucket or move it closer to the pool.
  5. If you’re playing with teams, players can take turns, with each person splashing water into the bucket until the time is up.

Winning:

  • The player (or team) who manages to get the most water in the bucket in one minute wins!
  • If playing with teams, you can tally the total amount of water each team splashed into the bucket to determine the winner.

Team Version:

If you have teams, each player can take turns, one at a time, splashing water into the bucket. The team with the most water in the bucket at the end of a set time wins.

Adult Version:

For adults, add more challenge by increasing the distance between the pool and the bucket or using a larger bucket that requires more splashing effort.

This game is a splash-filled, competitive challenge that works great for both individual and team play!

Kiddie Pool Toe Diving

Supplies: Kiddie pool, diving rings, and other small pool toys

Setup:

  1. Fill a kiddie pool with water and add a variety of small toys, diving rings, and other fun items.

How to Play:

  1. When the game begins, players must use only their toes to fish out as many items from the kiddie pool as possible.
  2. They can’t use their hands—only their feet!

Winning:

The winner can be either the first person to retrieve an item or the player who collects the most items by the end of the game.

Adult Twist:

Blindfold the players to make it even more challenging and fun!

Water Balloon Toss 

Supplies: Water balloons (auto-fill for faster filling)

Setup:

  1. Pair up all players and have them stand in two straight lines facing each other.
  2. Give each pair a water balloon (or a sponge if playing with young kids).

How to Play:

  1. Have someone count to three, and on “three,” everyone tosses their water balloon to their partner.
  2. If the partner catches the balloon or if it’s dropped but doesn’t break, they take one step back (keeping the teams in a straight line).
  3. If the balloon pops while being caught or thrown, or if it’s dropped and breaks, that team is out.
  4. Continue tossing the water balloons and taking steps back, gradually increasing the distance between partners.

Winning:

The last team remaining with an unbroken water balloon wins!

Adult Twist:

In the adult version, teams must catch the balloon without it breaking, even if it doesn’t pop. If the balloon hits the ground or is dropped, they’re out—making it harder to stay in the game!

Ultimate Water Balloon

That sounds like an amazing new game! Combining ultimate frisbee, a water balloon toss, and some added excitement is bound to create a unique and fun experience. If you have more details or specific rules for your ultimate water balloon game, I’d love to hear them! Feel free to share the link to the dedicated post, and I can help you come up with a summary or suggestions if needed.

Sprinkler Red Light Green Light 

Game: Shark and Minnows with a Sprinkler Twist

Setup:

  1. Set up a sprinkler somewhere in the yard that’s positioned to get players wet.
  2. Have kids line up on one side of the yard as “minnows” and choose one player to be the “shark,” who will start in the middle of the yard.

How to Play:

  1. The shark stands in the middle of the yard and shouts, “Swim across!” or a similar cue.
  2. The minnows must then run across the yard to the other side, trying to avoid getting tagged by the shark.
  3. If a minnow is tagged by the shark, they become a shark and join the shark in the middle for the next round.
  4. The sprinkler adds an extra layer of danger! If a minnow gets hit by the sprinkler while crossing the yard, they also become a shark and join the chase.
  5. Play continues until only one minnow remains, who becomes the next shark.

Winning:

The last minnow standing wins and becomes the shark for the next round.

This is a great way to add a little more excitement and cooling fun to a classic game!

Slide Down

Game: Slide and Splash Challenge

Supplies: Large bucket of water, plastic cups, playground slide, small bucket of water, timer

Setup:

  1. Place a large bucket of water at the bottom of the playground stairs.
  2. Put two plastic cups at the bottom of the stairs, ready for players to fill.
  3. At the bottom of the slide, set up a small empty bucket that players will need to fill with the water they carry.
  4. Mark a starting line at the base of the stairs where players will begin.

How to Play:

  1. When you say “Go,” the player must fill one of the plastic cups with water from the large bucket at the bottom of the stairs.
  2. After filling the cup, the player races up the stairs to the top of the slide.
  3. Once at the top, they must slide down the slide while holding the filled cup of water.
  4. At the bottom of the slide, the player must dump the water into the small bucket.
  5. The player continues to repeat the process: fill the cup, race up the stairs, slide down, and dump the water.

Winning:

  • The player wins if they fill the small bucket with water before one minute is up.
  • If they spill too much water during the slide, they have to try again, but every successful trip up and down gets them closer to filling the bucket.

Team Version:

  • If you’re playing with teams, have each player take turns. The team that fills the small bucket first (or with the most water) wins.

Adult Version:

For adults, increase the challenge by using larger cups, requiring the player to fill the cup to a specific level before starting, or increasing the distance they must race.

This game combines speed, precision, and a bit of water fun, making it a perfect challenge for hot days at the playground!

conclusion

These water games are the perfect way to cool off and have fun, whether you’re hosting a kids’ party, enjoying a family gathering, or just looking to add some excitement to a summer day. From classic favorites like water balloon tosses to creative new challenges like the Slide and Splash Challenge, these games will keep everyone entertained and splashed from head to toe! Whether you’re racing to fill a bucket, dodging water balloons, or splashing through sprinklers, the possibilities for fun are endless.

So grab your water guns, buckets, and balloons, gather your friends and family, and dive into these playful, competitive, and refreshing water games for hours of summer fun!

SPIDER INFESTATION COSTUME

Looking for a truly terrifying costume that’ll send shivers down everyone’s spine? Consider transforming yourself into a spider infestation! This unique and unsettling costume is perfect for those who want to stand out from the crowd and leave a lasting impression at your next Halloween party.

Imagine this: you’re covered head-to-toe in realistic-looking spiders, their legs sprawling out in every direction. As you move, they seem to writhe and squirm, creating an illusion of a living, breathing spider infestation. It’s a guaranteed conversation starter that’s sure to elicit both fear and admiration.

In this guide, we’ll provide you with step-by-step instructions on how to create your own spider infestation costume.

SUPPLIES 

  • Printable Tattoo Paper
  • Electronic Cutter
  • Cutting Mat
  • Cut File

TUTORIAL OVERVIEW

In this tutorial, I’ll guide you through cutting out designs using my Silhouette Cameo. However, this technique is also applicable if you’re using a Cricut—though I’m less familiar with the specifics of that machine! Rest assured, you can use Silhouette materials on a Cricut as well, and they offer a wide variety of cool options!

Silhouette all has -white, gold, and silver tattoo paper!

HOW TO USE TATTOO PAPER

The Silhouette tattoo paper can be a bit tricky, so let me guide you through the steps! We will be using the Print and Cut feature. Start by uploading the spider image and ensure that the Print and Cut option is selected in the page setup. This will display registration marks around the spiders.

Since the spider legs are so small, I added an offset outline to give the tattoo a thicker appearance!

To begin your tattoo project, start by pressing the star (offset) in your design software. This will allow you to create an outline of the spiders, which you can adjust as much as you like. Once you’ve applied the outline, carefully remove the black spider images, leaving only the outlines behind.

When you open your package of tattoo paper, you will find two white sheets and two blue sheets. The blue sheet serves as the top layer. Take one of the white sheets and load it into your printer with the shiny side facing up.

Finally, go to your Silhouette Studio and press print to send your design to the printer. This will prepare your tattoo outline for application. Enjoy your creative process!


If you need a good printer- check out this article.

The blue sheet is the clear protective layer that activates the tattoo.

It has a strip across the top. Peel off this strip and carefully align it with the top of your white sheet. Be cautious not to touch the sticky side.

Gently remove the backing and adhere the entire clear layer to the white tattoo paper, making sure to rub it down thoroughly.

The top piece acts as a clear protective layer, similar to those fake tattoos you may have used before. You need to peel off the clear layer, then flip the tattoo over to apply it to your skin.

Once prepared, place the sheet onto a Silhouette mat and load it into your Silhouette Cameo.

Cutting out the spiders

The spider legs are quite small, so I prefer to use an offset effect to make the spiders a bit thicker. This creates a subtle clear outline around each spider, enhancing their visibility. Make sure to select the Silhouette tattoo paper cut setting in your software. Once you’ve done that, proceed to cut out the spiders!

Apply your spider tattoos:

When you’re ready to apply the tattoo, start by peeling off the protective layer. The tattoo will be slightly sticky. Position the sticky side down on your skin where you want it to go. Press a damp cloth against the tattoo until it is saturated, then gently remove the backing. The backing should slide off easily, leaving behind a nice creepy spider!

How to Remove Temporary Tattoos:
If you’re concerned about removing temporary tattoos, especially from your face, don’t worry! A little baby oil works wonders, and the tattoos come off easily. This is a definite win! I’ve also heard that hand sanitizer, rubbing alcohol, and nail polish remover can be effective alternatives.

Troubleshooting Print and Cut:
If your print and cut isn’t cutting precisely around the spider, you may need to recalibrate your machine. If it’s not registering the print and cut registration marks, try using a brighter light near your Cameo. Often, lighting issues can affect the registration process!