face wax before and after

DIY CHAMOMILE AND COCONUT OIL BODY BALM

Chamomile is one of my favorite herbs to incorporate into DIY beauty products. Its use in skincare dates back to ancient civilizations, including Egypt, Greece, and Rome. Even today, chamomile remains a popular choice for its soothing, anti-inflammatory properties. In this balm recipe, we infuse coconut oil with chamomile over several hours to create a nourishing and skin-loving blend.

“Olive oil is blended with coconut oil to add extra softness, while yellow beeswax provides structure and ensures the balm stays solid in warmer temperatures. If you live in a particularly hot climate, consider adding more beeswax to raise the melting point. Prefer a softer balm? Simply reduce the amount of beeswax.

To test the balm’s consistency before pouring it into containers, try the frozen spoon trick—it’s a quick and effective way to check the texture when cooled. In our tests, this balm begins to melt at around 100°F.

Want even more ways to incorporate chamomile into your skincare routine? Explore the recipes below!”

Top Row: Chamomile Oat Melt & Pour Bars, Lavender & Chamomile Goat Milk Bath Tea
Bottom Row: Soothing Eye Tea, Yellow Chamomile Cold Process Soap

What You’ll Need:
3 Candle Tins
12 oz. Coconut Oil (10 oz. infused coconut oil)
0.5 oz. Chamomile Herb
2 oz. Olive Oil
1 oz. Yellow Beeswax

STEP 1: To begin, infuse the coconut oil with chamomile. In a heat-safe container, add 12 ounces of coconut oil and heat it in the microwave until it reaches approximately 150°F. You’ll only need 10 ounces of infused coconut oil for this recipe, but some oil will be absorbed or lost during the straining process. Be cautious when handling the hot container. Add the chamomile herb to the oil and let it steep for at least 2 hours, or up to overnight, to allow the beneficial properties of the chamomile to infuse fully. If the coconut oil solidifies as it cools, simply reheat it in the microwave to maintain a liquid state. Alternatively, you can use a crockpot to keep the oil at a consistent temperature during the infusion process.

STEP 2: After the infusion process, strain the coconut oil to remove the chamomile herb. Use a fine mesh strainer lined with a paper towel to ensure all small pieces are filtered out. You may need to repeat this step for thorough straining. Once strained, weigh the remaining oil. Some coconut oil will be absorbed by the chamomile or lost during the straining process, which is why extra oil was infused. For this recipe, you need 10 ounces of infused coconut oil. If you have less than that, supplement with un-infused coconut oil until you reach the required amount.

STEP 3: Combine the beeswax and olive oil with the infused coconut oil in a heat-safe container. Heat the mixture in the microwave using 30-60 second bursts, stirring between intervals, until the beeswax is fully melted. Beeswax has a high melting point, so handle the container with caution—it will become very hot. Avoid using a glass container with excessive empty space, as the heat can cause it to crack or even explode. Once the beeswax is melted, carefully remove the container from the microwave, ensuring safe handling of the hot mixture.

STEP 4: Stir the melted mixture thoroughly to combine all the ingredients, then pour it into the candle tins. Let the balm cool and harden completely, which may take several hours. Once set, you can use the balm by rubbing your fingers on the surface to warm and slightly melt it, then apply it to your skin wherever needed.

CONCLUSION

This DIY Chamomile & Coconut Oil Body Balm is a simple, soothing, and natural way to nourish your skin. Infused with chamomile’s anti-inflammatory properties and combined with the moisturizing benefits of coconut oil, olive oil, and beeswax, this balm provides a perfect balance of softness and firmness. Whether you’re battling dry skin or just need a gentle, all-natural remedy, this balm is an easy and effective solution. With just a few ingredients and steps, you can create a skin-loving product that’s both practical and luxurious. Enjoy the calming benefits of chamomile in your skincare routine!

DIY SEAWEED & CUCUMBER FACE MASK

Face masks are a fun and effective way to pamper your skin, and this Seaweed and Cucumber Face Mask is packed with skin-loving ingredients that work for a variety of skin types. The mask is made by emulsifying oils with water and adding a blend of dry ingredients like sea clay and spirulina powder.

The oils used in this mask were selected for their light texture and nourishing properties. Cucumber seed oil is a fantastic moisturizer that absorbs quickly into the skin, while the seaweed extract is infused in fractionated coconut oil, which is also light and hydrating. Together, they leave your skin feeling refreshed, moisturized, and non-greasy.

This seaweed extract is part of the new Seascape Collection, which includes an array of fragrance oils, exfoliants, powders, and more.

The combination of kaolin clay and sea clay creates a thick yet spreadable texture that isn’t overly drying, making this mask perfect for normal to combination skin. If you have dry skin, you can reduce the amount of clay, similar to the DIY Lavender Clay Face Mask, while those with oily skin might benefit from increasing the clay content, as shown in the DIY Sea Clay Mask.

Spirulina powder adds both color and skin benefits, packed with vitamins, nutrients, and antioxidants. Its deep green hue gives the mask a beautiful color, though keep in mind that spirulina does have a fishy odor, which the ginger essential oil in this recipe helps to mask.

Substitutions & Notes:

  • Polawax Emulsifying Wax is used here for a smooth, reliable emulsion. You can substitute it with a generic emulsifying wax, though this recipe wasn’t tested with it.
  • Oils: Avocado and cucumber seed oils are chosen for their lightweight, hydrating qualities, but you can substitute other liquid oils that absorb easily into the skin. Altering the oil amount will affect the texture of the mask.
  • Preservative: Since this recipe contains water and is essentially a lotion, a preservative like Optiphen is necessary to prevent mold and bacteria. Alternatives like Phenonip will also work.
  • Clay: Adjust the amount of clay based on your skin type. More clay is better for oily skin, and less is ideal for dry skin, though this will make the product thinner.
  • Clay Variety: You can swap clays based on your preferences. Different clays absorb differently, which will affect the mask’s feel on the skin.
  • Fragrance & Essential Oils: If you have sensitive skin, it’s best to omit these, as they may cause irritation.
  • Seaweed Extract: Feel free to replace with a different extract of your choice.

What You’ll Need:

Four 8 oz. Bail Jars 
21.4 oz. Distilled Water
1 oz. Cucumber Seed Oil
1.3 oz. Avocado Oil
1 oz. Polawax Emulsifying Wax
0.8 oz. BTMS-50 Conditioning Emulsifier
5 oz. Kaolin Clay
2 oz. Sea Clay
0.4 oz. Spirulina Powder
3 mL Ginger Essential Oil
0.5 oz. Seaweed Extract
0.2 oz. Optiphen

Equipment Preparation:

Before beginning, ensure all equipment is disinfected to keep your mask free from germs and bacteria. Prepare a 5% bleach water solution and dip all utensils—mixing containers, stick blender, spoons, and spatulas—allowing them to air dry completely before use.

Instructions:

Step 1: In a medium-sized container, measure out:

  • 5 ounces of kaolin clay
  • 2 ounces of sea clay
  • 0.4 ounces of spirulina powder

Mix the clays and spirulina powder thoroughly until fully combined.

Step 2: In a heat-safe container, combine the following ingredients:

  • 1.3 ounces of avocado oil
  • 1 ounce of cucumber seed oil
  • 0.8 ounces of BTMS-50
  • 1 ounce of Polawax

Heat the container in the microwave in 30-60 second bursts, stirring in between, until the waxes are fully melted. Be cautious when removing the container, as it will be very hot. Once melted, set the container aside.

Step 3: In a separate large container, heat 21.4 ounces of distilled water in the microwave (or on the stovetop) until it reaches about 160-170°F. If some water evaporates, remeasure and add more distilled water as needed to ensure you have the correct amount.

Step 4: Once the water has reached the correct temperature, check the temperatures of both the water and the oil-wax mixture. Both should be around 160°F. If the oil and wax mixture has cooled, reheat it in the microwave. Next, submerge the stick blender into the water and burp it to release any air bubbles.

Pour the oil and wax mixture into the hot water, using a spatula to scrape out every bit. Start pulsing the stick blender. As the ingredients begin to emulsify, the mixture will turn a milky white. Continue pulsing and stirring for about a minute to fully combine.

Step 5: Gradually add heaping spoonfuls of the clay mixture to the emulsified water and oil blend. Use the stick blender to pulse and blend until the clay is fully incorporated and the mixture reaches a smooth, thick consistency. Continue blending until the mask is well-combined and free of lumps.

Step 6: Continue stick blending the mixture for about 1-2 minutes, ensuring it stays smooth and well-incorporated. Use a spatula to scrape down any clay that may have stuck to the sides of the bowl.

Check the temperature of the mixture. Once it has cooled to about 130-140°F, add the following ingredients:

  • 0.2 ounces of Optiphen preservative
  • 3 mL of ginger essential oil
  • 0.5 ounces of seaweed extract

Stick blend again, remembering to burp the stick blender to release any air bubbles. Continue blending until all the ingredients are fully combined.

Step 7: Carefully pour the finished mixture into your bail jars or preferred containers. Tap the jars gently on the counter to help release any air bubbles. Alternatively, you can spritz the surface with alcohol to further eliminate bubbles.

Leave the lids off and allow the containers to cool for several hours to prevent condensation from forming inside the jars. Once fully cooled, you can secure the lids.

Once fully cooled, the mixture will have a thick, lotion-like texture. To use, apply a medium layer of the mask to clean, dry skin, avoiding the immediate eye area. Allow the mask to sit for at least 15 minutes to allow the ingredients to work their magic.

After 15 minutes, rinse off the mask with warm water. There’s no need to wash your face afterward, but you can do so if you prefer. Enjoy the refreshed, hydrated feel of your skin!

CONCLUSION

This DIY Seaweed & Cucumber Face Mask is a nourishing and effective way to pamper your skin with natural ingredients. The combination of sea clay, kaolin clay, spirulina powder, and hydrating oils leaves your skin feeling refreshed, smooth, and deeply moisturized. With customizable options to suit different skin types and simple, straightforward steps, this mask is a great addition to your skincare routine. Enjoy the process of making it yourself and the glowing results afterward!